It’s been estimated that anywhere between 5 to 10 percent of American homes have water leaks on any given day.
On average, those leaks drip away more than 90 gallons of water a day. Now, you don’t have to be an expert in leak detection services to realize that those nasty leaks won’t just drain your water supply; they’re likely to drain your pocket too.
Leaky Pipes: The Known and the Unknown
In some cases, you may have a leak but be blissfully unaware that you do. Of course, that sense of bliss doesn’t last long. A quick glance at your water meter or an attentive look at your water usage will soon reveal the leaky truth.
When you eventually find that you do have a water leakage, a different problem emerges.
Just where exactly is that leak coming from in the first place?
Do you have to embrace the investigative powers of Columbo to track down that leaky pipe?
The good news is that you can save some money, and prevent potential disaster along the way, by identifying the source of your leak early on yourself.
If you’re unsure how to do this, or wondering where to even start, do not worry! Help is at hand.
In this article, we’re sharing our leak detection services guide to help you identify the source of your leak.
Ready for your crash course?
Let’s do this!
Leak Detection Services: How to Spot Where that Water Leak is Coming From
1. First Thing’s First: Confirm That You Have a Leak
Many of us may have suspicions that we have a leak in our home, but the first step towards locating a leak is to confirm that we actually have one.
One of the quickest ways to do this is to check your water meter.
Here’s how to do this efficiently:
- Turn off all the water in your home for a few hours
- Shut off all faucets, and make sure things like the dishwasher and washing machine are not running
- Take a look at the meter. What is it doing? Is it changing? Is it stagnant?
- If it changes immediately, you likely have a fast-moving leak somewhere.
- If the meter doesn’t change immediately, wait a while and check it again every half hour. Is it changing? If it is, you likely have a slower leak.
You can also look at your water usage and your water bill to confirm that you have a leak.
Check out those numbers. Is your water bill above average? If it is, and you have no good reason for this, you likely have a leak somewhere.
Once you confirm that you have a leak, it may not be time to call out the leak detection services just yet.
Let’s take a look at how to find the leak yourself.
2. Basement or Crawl Space
Water always goes to the lowest level first, so it’s a good idea to start with the lowest level of your home.
Then, do the following:
- Turn off the water
- Have a good look around for any water (however small) that has pooled on the ground
- Listen for sounds of running water. If you hear any, track where the noise is coming from, and track where that pipe is going.
Remember, if you have everything turned off, no water should be running through any pipes. If you hear water, don’t stop until you’ve located where it’s coming from and where it’s going to.
3. Every Room Inside
Once you have checked the lower levels, conduct a walk-through of every other room in your home.
In this walk-through, you’ll be inspecting for specific things.
A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. According to the United States Environmental Protection Agency, that’s the amount of water needed to take more than 180 showers!
Check all of the faucets in every room. Take note of any leaking faucets because every little leak adds up.
If the problem is a leaking faucet, you probably won’t need to be a professional in leak detection services to fix it. Usually, faucets require a simple DIY fix.
In every room, inspect each and every pipe.
Leaking pipes cause two major problems:
- They increase the chances of mold developing. Mold is known for causing serious health issues
- They can also cause damage to the structure of your home.
When you’re looking for leaking pipes, look for stained or wet carpet, ceilings, and walls.
Is there any water escaping past your shower door? Splash leaks can cause serious damage if the water seeps into the flooring.
Drain leaks are a major issue too. Is there any water sneaking around the outside of the drain where it’s connected to the shower? If so, you may have a water leak on your hands.
4. Leaky Toilet
The toilet accounts for a vast percentage of your water use. As such, it’s vitally important that you inspect it for any leakage.
To test for leaks, place few drops of food coloring or dye tablets into your toilet tank. Do not flush the toilet and wait for about an hour. If the color shows up in your bowl, then you have a leak and it may be time to call a plumber.
5. Hot Water Tank
When checking your hot water tank, the pressure relief valve is your point of focus.
If this valve is directly plumbed to a drain, it may be difficult to see the problem.
Without touching your pressure relief valve, listen for water flowing through any connected hoses – it may present as a hissing sound.
If you identify a leak here, you’ll
Water leaks do not just happen inside your home, they often occur outside as well.
There are two major causes of outside leaks:
- Spigots. Check all of your spigots. Look for leaks first, then listen for running water
- Service Line and Irrigation System Leaks. Look for soft or muddy areas. Sometimes, an underground pipe will leak with no obvious outer signs. Be vigilant for this.
Leak Detection Services: Finding That Leak One Step at a Time
So, there you have it. Your comprehensive leak detection services guide at your fingertips.
Should you have any questions, or if you feel you need our services, reach out and talk to us. We’re always happy to help.
Here is a collection of places you can buy bitcoin online right now.